Exhaust System Rerouted

Exhaust out the side

So in order to free up some precious space underneath the bus we needed to reroute the exhaust pipe. It originally ran from the front of the bus all the way to the very back. This 4″ exhaust pipe occupied a lot of space and nothing could be close to it because of the heat.

So, we removed the pieces of exhaust that were pieced together from the bank of the bus up and over the rear axel stopping 2 feet before the muffler. Now all we needed was an elbow which we got from NAPA to make the turn out the passenger’s side. The next step was to cut off about a foot of the exhaust pipe still remaining and then place the elbow on that shortened exhaust pipe. With the elbow in place we were able to use a piece of the tail pipe we removed to attach to the elbow and run it out between the fuel tank and the rear tire.

The only part you really see is the cool cheap stainless steel exhaust tip.

Leave a Reply